Menu
Cart 0
Bi-Directional Closed Loop Extractor

Bi-Directional Closed Loop Extractor

  • $ 2,40749

Our popular MKIII Closed Loop Extractor now comes with Bi-Directional flow for filling your columns from either the top or the bottom!!!

This Extractor is designed to be used with butane, hexane or propane. This closed loop extractor comes in a variety of sizes, from a 1.5" x 12" (73 gram) column to a 3" x 36" (900 gram) column. You can also purchase additional columns and bases separately, either as upgrades or if you just need extras. The additional columns and bases can be found in other sections of our online store if you chose to purchase them separately.

The MK III closed loop extractor in this listing comes fully assembled by our engineers and technicians, and vacuum and pressure tested for at least 48 hours to ensure seal.

The MK III closed loop extractor is manufactured out of 304 food grade stainless steel, and meets all of today's sanitary standards.

Parts List that will come with your fully assembled and tested Bi-Directional  Closed Loop BHO Extractor are as follows:

    ALSO AVAILABLE WITH 1.5" OR 3" DEWAXING COLUMN!!!!!!

    (Shown with optional Compound Gauge)

    FEATURES:

    - Closed Loop and Eco Friendly (Reclaim 98% of your solvent)
    - Expandable (Increase the sizes of not only your columns, but your collection pot as well!)
    - Pressure tested at double the required pressure.
    - Stainless Steel Construction
    - Excellent Yields

    ADDITIONAL ITEMS NEEDED FOR OPERATION:

    - Recovery Pump
    - Vacuum Pump
    - Condensing Coil
    - Recovery Tank
    - Refrigerant Scale
    - Butane

    DETERMINING TRI CLAMP SIZE

    Tri Clamp sizes are determined by the outer diameter of the pipe or tubing, not the outer diameter of the flange or Tri Clamp itself. The flange of a Tri Clamp fitting typically has about a ½” inch greater diameter than the outside diameter of the pipe. This can become especially confusing when the Tri Clamp fitting has no pipe attached to it, as is the case with adapters, For instance, a 1.5" Tri Clamp to 1/2" hose barb adapter is not 1.5" inches in any dimension, but the Tri Clamp end will fit any other 1.5" Tri Clamp fitting. 

    If you have any doubts about what size Tri Clamp fittings your project needs, simply measure the outside diameter of the flange (dimension "B" below) and consult the chart below, or feel free to contact us .

     

     

    Pipe Outer Diameter
    A

    Flange Outer Diameter
    B

    Pipe Inner Diameter
    C

    Tri Clamp Dimension Diagram

    1"

    1.98"

    .87"

    1.5"

    1.98"

    1.37"

    2"

    2.52"

    1.87"

    2.5"

    3.05"

    2.37"

    3"

    3.58"

    2.87"

    4"

    4.68"

    3.83"

    6"

    6.57"

    5.78"

    8"

    8.57"

    7.78"

    10"

    10.57"

    9.69"

    12"

    12.57"

    11.81"

     

     Disclaimer:

    Depending on the type of oil you are extracting, these product(s) may not be legal to operate in some areas. For safety reasons, these product(s) are designed and intended for outdoor use only. Emerald Gold, LLC strongly discourages any unlawful use of these product(s), and is not responsible for any damage or injury caused by the misuse or unlawful use of these product(s). Any person or entity that uses the equipment and/or information provided by Emerald Gold, LLC does so entirely at their own risk, and accepts all liability concerning the use of the product(s) and information listed above.

    *WARNING* Never extract with butane or propane indoors. May cause serious injury, or even death.