Menu
Cart 0
3" Copper and Stainless Whiskey Column

3" Copper and Stainless Whiskey Column

  • $ 34331


This 3" Copper and Stainless Pot Still Head comes with a Liebig Condenser and a commercial grade thermometer with a 3" face. The column is 3" diameter. The Liebig condenser has a 1/2" inner pipe and 3/4" outer pipe. The condenser is 27" long. The cooling water connection are 1/2" OD, so a 1/2" garden hose will fit them perfectly. The condenser is connected to the column by a 1/2" tri clamp and gasket. There is also a 3" tri clamp and gasket included for attaching the column to your still. The column is 13 3/4" long and the condenser is 32" long. 

  • Commercial grade thermometer with a 3" Face.
  • 3" Tri clamp stainless ferrule connection welded to the base of the column for connecting to a still.
  • 3" Tri clamp and gasket for connecting the column to the still.
  • 3" Tri clamp Dephlegmator connection with 2" Tri clamp and gasket.
  • Removable copper liebig condenser.
  • Two 5/8" hose barb connections on the Dephlegmator for cooling water.
  • Two 5/8" hose barb connections on the condenser for cooling water.
  • Super heavy duty construction using food grade copper welding rod and heavy gauge copper.
  • Enough copper packing to fill the column.
All of our copperheads and columns are TIG welded using food grade DHP copper welding rod. This means that the welds are as strong or stronger than the surrounding metal. This DHP copper rod melts at around 1,700 F, while the solder that our competitors use melts at around 400F. Solder joints are not nearly as strong as our welds, plus solder is messy, runs, and gets all over the metal, while our welds are tight, clean, and pretty.

 

This is only for column. Pot still is sold separately. 

This item comes with a 1 year warranty which covers manufacturing defects and leaks.

 

DETERMINING TRI CLAMP SIZE

Tri Clamp sizes are determined by the outer diameter of the pipe or tubing, not the outer diameter of the flange or Tri Clamp itself. The flange of a Tri Clamp fitting typically has about a ½” inch greater diameter than the outside diameter of the pipe. This can become especially confusing when the Tri Clamp fitting has no pipe attached to it, as is the case with adapters, For instance, a 1.5" Tri Clamp to 1/2" Hose Barb Adapter is not 1.5" inches in any dimension, but the Tri Clamp end will fit any other 1.5" Tri Clamp fitting. 

If you have any doubts about what size Tri Clamp fittings your project needs, simply measure the outside diameter of the flange (dimension "B" below) and consult the chart below, or feel free to contact us.

 

 

Pipe Outer Diameter
A

Flange Outer Diameter
B

Pipe Inner Diameter
C

 

1"

1.98"

.87"

1.5"

1.98"

1.37"

2"

2.52"

1.87"

2.5"

3.05"

2.37"

3"

3.58"

2.87"

4"

4.68"

3.83"

6"

6.57"

5.78"

8"

8.57"

7.78"

10"

10.57"

9.69"

12"

12.57"

11.81"

Disclaimer:

These products may not be legal to operate in some areas. Emerald Gold, LLC strongly discourages any unlawful use of these products and is not responsible for any damage or injury caused by the misuse or unlawful use of these products. Any person or entity that uses information or equipment provided by Emerald Gold, LLC does so entirely at their own risk and accepts all liability concerning the use of the aforementioned equipment and information. At this time, Emerald Gold, LLC is not required to report any customer information to any federal or state agency.